MOUNTING ANGLE
| Technical data: |
| Body and washer material: steel class 5.6 – zinc plated |
| Name | Angle(mm) | Material(mm) | Hole(mm) | Suitable for profile |
| Mounting angle / 27-45° | 45° | 25×4 | 25×8.5 | 27/18,28/30 |
| Mounting angle / 27-90° | 90° | 25×4 | 25×8.5 | 27/18,28/30 |
| Mounting angle / 38-45° | 45° | 40×6 | 10.5 | 38/40,40/60,ST41/21,41,62,82 |
| Mounting angle / 38-90° | 90° | 40×6 | 10.5 | 38/40,40/60,ST41/21,41,62,82 |
| Mounting angle with 2 holes / 38-90° | 90° | 40×6 | 10.5 | 38/40,40/60,ST41/21,41,62,82 |
| Mounting angle with 3 holes / 38-90° | 90° | 40×6 | 10.5 | 38/40,40/60,ST41/21,41,62,82 |
| Mounting angle with 2×2 holes, corner / 38-90° | 90° | 40×6 | 10.5 | 38/40,40/60,ST41/21,41,62,82 |
The mounting angle is used when it is necessary to make a construction using fi xing rails and cantilever arms. Example: A bearing component for cantilever arms can be set together by means of two 45-degree mounting angles and a piece of a fi xing rail. To facilitate the assembly a 45-degree mounting angle is supplied for a fixing rail profile of 38/40 prefabricated with two washers and two screws. |
