Pipe Clamp with Combi Nut Without Rubber
Short description:
Pipe Clamp with Combi Nut Without Rubber
Long Descriptions
Spiral duct clamp without rubber – NKSCL
| Code | Fixing Range(mm) | Bolt | Steel Section(mm) | Nut |
| NKSCL80 | 82.4 | M6 | 2.0×25 | M8/M10 |
| NKSCL100 | 103.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL125 | 128.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL140 | 143.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL150 | 153.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL160 | 163.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL180 | 183.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL200 | 203.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL224 | 227.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL250 | 253.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL280 | 284.8 | M6 | 2.0×25 | M8/M10 |
| NKSCL300 | 304.6 | M6 | 2.0×25 | M8/M10 |
| NKSCL315 | 319.8 | M6 | 2.0×25 | M8/M10 |
| NKSCL355 | 359.8 | M6 | 2.0×25 | M8/M10 |
| NKSCL400 | 404.8 | M6 | 2.0×25 | M8/M10 |
| NKSCL450 | 456.4 | M10 | 2.0×25 | M8/M10 |
| NKSCL500 | 504.8 | M10 | 2.0×25 | M8/M10 |
| NKSCL560 | 564.8 | M10 | 2.0×25 | M8/M10 |
| NKSCL600 | 604.8 | M10 | 2.0×25 | M8/M10 |
| NKSCL630 | 636.0 | M10 | 2.0×25 | M8/M10 |
| NKSCL710 | 716.0 | M10 | 2.0×25 | M8/M10 |
| NKSCL800 | 806.0 | M10 | 2.0×25 | M8/M10 |
| NKSCL900 | 906.0 | M10 | 2.0×25 | M8/M10 |
| NKSCL1000 | 1007.2 | M10 | 2.0×25 | M8/M10 |
| NKSCL1000 | 127.2 | M10 | 2.0×25 | M8/M10 |
| NKSCL1000 | 1257.2 | M10 | 2.0×25 | M8/M10 |
|
Application
Used for suspension of circular ducts the Clamps are especially designed for vibration
attenuation
Dia 80 up to 400 mm with screw M6 on either side,1-point suspension with M8/M10 nut on top
Dia 450 up to 1000 mm with 2-point suspension with M10 hole on either side
Composition
Made of hot dipped sendzimir zinc plated steel
Maximum suspended weight: 500 kg
Width is 20 mm for Dia 80 – 400 mm and 25 mm above Dia 400 mm
Thickness is 1.8 mm under Dia 400 mm and 2.3 mm above Dia 400 mm
Rubber inlay:
Working temperature: -40°C + 120°C
Material hardness: HS 60° +/-3°
Accessories
Threaded rods, type THA (not included)
|
