Duct Holder V Without Rubber
Short description:
Duct Holder V Without Rubber
Long Descriptions
HANGER TYPE V
| Technical data: |
| Material: steel class 5.6 – zinc plated |
| Name | Thread | Hole(mm) | Material thickness(mm) | Safe lad(N) |
| Hanger type U | 8 | 8 | 30×2 | 0.5KN |
| Trapezial sheet hanger type V regulation nut / M8 | M8 | – | 2.5 | 1300 |
| Trapezial sheet hanger type V regulation nut / M10 | M10 | – | 2.5 | 1300 |
| Trapezial sheet hanger type V welding nut / M8 | M8 | – | 2.5 | 1300 |
| Trapezial sheet hanger type V welding nut / M10 | M10 | – | 2.5 | 1300 |
| Trapezial sheet hanger type V with hole / 13 mm | 13 | 2.5 | 1300 | |
| Trapezial sheet hanger type V with damper /2.5 | 8 | 2.5 | 1300 |
|
It is used for fixing on trapezoidal sheets. By means of the mechanism of adjustable bending parts the hanger can be easily adjusted for different profiles of trapezoidal sheets. The hanger can be supplied including an adjusting nut for additional height readjustment.
We recommend using a hinge pin of a type of M8×120 for the fixing of the roofing sheet hanger to trapezoidal sheets. The hanger can also be fixed by means of sheet-metal screws or steel rivets. To make holes into trapezoidal sheets use trapezoidal sheet punching pliers.
|
HANGER TYPE U
